2014 Ford Focus
Definitely a project car. Runs really well just in that stage where it needs a few things to really have it buttoned up for Rallycross or something track related. Originally had a wide body but was removed due to ARA rules and planned to design something to meet the specifications. Selling this due to lack of time with a change of some of my personal goals. Ideally looking to buy a fully built car that I could have time fixing, vice trying to build. Car has not been logged for any of the items put into it.
Cage Built by Competition Cages
A few gussets and harness points welded in by myself.
Steering column welded in by me.
Stock Motor with 70k miles (two rallycross events)
Mishimoto Oil Catch Can
Stratified Tuned
Sound Symposer Delete (COBB)
Original Transmission with 150000 miles
Clutch replaced with 70k engine
NRG Quick Release
SPARCO Steering Wheel
NRG Quick Release
SPARCO Steering Wheel
Seats/Safety
OMP HTE-R with SPARCO mounting plate and OMP Brackets (Valid 2027)
Used OMP COMP Seat with SPARCO mounting plate and SPARCO brackets (temp seat for rally cross)
SPARCO 6 point harness
GF 4 point harness
Suspension
Bilstein Struts
King Rear Springs
Stock Front Springs
Wheels/Tires
Vision 16in x4
Bridgestone Blizzak
Brakes
Stock (new pads/rotors soon)
Skid Plate
Custom plate designed by myself
1/2 6061 aluminum
Mounted by subframe and two welded in tubes
Heat resistant foam and wire coving vent holes
AC/Heat
Still has everything needed for AC/Heat besides vent tubes for stock vent locations
Electrical
A lot of the unnecessary units were removed.
Still retains everything for proper gauges, starting, lights etc.
Needs reworking to mount control units for turn signal/ lights or custom wiring.
Happy to share more picture and answer any questions.
Seats/Safety
OMP HTE-R with SPARCO mounting plate and OMP Brackets (Valid 2027)
Used OMP COMP Seat with SPARCO mounting plate and SPARCO brackets (temp seat for rally cross)
SPARCO 6 point harness
GF 4 point harness
Suspension
Bilstein Struts
King Rear Springs
Stock Front Springs
Wheels/Tires
Vision 16in x4
Bridgestone Blizzak
Brakes
Stock (new pads/rotors soon)
Skid Plate
Custom plate designed by myself
1/2 6061 aluminum
Mounted by subframe and two welded in tubes
Heat resistant foam and wire coving vent holes
AC/Heat
Still has everything needed for AC/Heat besides vent tubes for stock vent locations
Electrical
A lot of the unnecessary units were removed.
Still retains everything for proper gauges, starting, lights etc.
Needs reworking to mount control units for turn signal/ lights or custom wiring.
Happy to share more picture and answer any questions.