2013 Pinty’s Series NASCAR

[ Race Car / Touring / Sports ]

This car comes in at around 550hp with current carb, and is capable of 650hp with a large carb. Car has been used exclusively for track days (no races) after complete chassis, motor, transmission refresh.
> M1 Arrow Racing Motor: ~20 hours

> G-Force 4-Speed Trans: ~4 hours

> 3.89 Ford 9 inch axle

> Brand new pads, rotors, engine oil, diff oil, trans oil.

Motor spec:

NASCAR approved for the Pinty’s Series
Mopar 5.9 liter (362.3 cubic inches) aluminum block (not related to the “LA” 360)
Bore x stroke: 103.124 mm x 88.9mm (4.060″ x 3.5″)
11:1 compression ratio
Molner forged crank
Mahle pistons & rings
Dyer forged 160.0mm (6.300″) long connecting-rods
Mopar 6.4 liter “Apache” aluminum cylinder heads with CNC porting
Upgraded valvetrain parts
Hydraulic roller lifter camshaft
Arrow mid-rise aluminum intake manifold
Three-stage dry sump oil pump
Dry sump oil pan for oval and road course tracks

Mechanical fuel pump

Bosch 140 amp alternator, internally regulated
Mopar power steering pump