BWM E36 M3 Racecar NASA. ST5 ST4 GTS2

$25,000
[ Race Car / Touring / Sports ]

For sale my 1997 BMW E36 M3 Racecar. I’ve owned this car since 2017 and built it from a street car to where it is now. Caged and converted to a full Racecar in 2020. It has mainly been run it NASA Super Touring 4 and 5 series. I am selling due to lack of time for racing since starting a family. Car is fast and easy to drive, many races and multiple podiums over the years. All safety is up to date it is ready to race.

 

List of specs:
Engine:

Fully Refreshed S52 with 2 seasons on it built by Hispeed Motorsports
JE Pistons Stock Compression
Refreshed Cylinder Head helicoil cam studs
Supertech Double Valve Springs
ARP Head Studs
ARP Rod Bolts
Bimmerworld Group N Motor Mounts
Stewart Water Pump
OBD1 Thermostat
Oil Pressure and Temp Gauge
Water Temp Gauge
CSF Radiator
Achilles Oil Pan Baffle
Achilles Oil Pump
Kinematic Speed Radiator Duct
Bimmerworld Race Exhaust
Bimmerworld Track Pipe
M50 Manifold Conversion
Spal Electric Fan
Bimmerworld Fuel Starve Kit. Dual Pumps

Drivetrain:

Tilton Single Disk Race Clutch
3:73 Rear Differential w/ 3 Clutch LSD
Front Diff Bolt Upgrade
Condor Trans Mounts
ZF 5 Speed Trans
Bimmerworld Stainless Clutch Line

Safety:

Full cage w/ footwell protection build by HiSpeed  Motorsports
OMP Containment Race Seat ’25 exp
Scroth 6 Point HANS race harness ’28 Exp
Lifeline Manual Fire System ’27 exp
Bimmerworld Cutoff Switch
Handheld Fire extinguisher w/ quick release
VAC seat mounts

Suspension/Brakes/Steering

TCK 2 way Koni Shocks
500F 600R Spring rates. 400F 500R Spares
Condor Bushings all around
Z3M Steering Rack (1 weekend on it)
Turner Swaybars
SPL Rear Camber Arms
Core4 Motorsports Front Hubs with ARP Studs
Stock Brake Calipers DTC 60 Pads Brass Bushings

Chassis

Rogue Strut Tower Brace
OEM X Brace
Nine Lives Wing
Birchwood 4” Splitter
Build Journal Quick Release Splitter mounts
Hard Motorsports Splitter Struts
3D Printed Brake Duct Blockoffs
Re-Enforced RTAB pockets
Sway Bar Attachment Bracket Re-Enforcements
Trackspec Hood Vents
Antigravity Battery
Aerocatch Hood Pins
Gutted doors w/ condor polycarbonate windows

Laptimes:

NJMP Thunderbolt 1:27.8 (ST4 Trim)
NJMP Lightning 1:13.0 (ST5 trim)
Limerock 59.7 (ST5 trim)
Watkins Glen 2:08.8 (ST4 Trim)
Summit Main 1:21.8 (ST5 Trim)

 

Spares, wheels to be sold with the car
2 Front Brakes Hoses
1 set front calipers
2 radiator Hoses
1 throttle cable
1 Throttle body
1 coolant expansion tank
1 Power Steering Pump
1 Alternator
1 set of front springs 400lbs
1 set rear springs 500lbs
1 set coilpacks
1 Thermostat

Wheels.

1 sets 17×9 Et30 Apex Arc 8. Hoosier R7 3HC
1 set 17×9 et30 Apex Arc 8 Hoosier R7 20+ HC