Gearbox Type: G 96.92 with oil / water heat exchanger.
Number of Gears: 6
Chassis: Basis 911 GT3 with weight optimised shell
Dry Weight: 1170 kg
Wheels: Three piece BBS-racing wheel front 9J x 18″ rear 11J x18″
Suspension & Steering
Front suspension Independent McPherson strut with alloy wishbones and spherical bearings, coil springs and five position adjustable anti-roll bar… Diameter =.26,8mm.
Rear suspension Independent multi-link rear suspension with ‘LSA System, coil springs and three position adjustable anti-roll bar… Diameter =.20,7mm.
All suspension links are mounted with spherical bearings.
Steering Rack-and-pinion steering with servo assistance.
Wheels & Tyres
Wheels Three piece BBS-racing wheel front 9J x 18″ rear 11J x18″
Tyres (Delivery specification) Front Pirelli 245 / 645 x 18 (rain)
(Delivery specification) Rear Pirelli 305 / 660 x 18 (rain)
Centre lock Front and rear axles
Brakes
Multi-piston, fixed-caliper brakes front and rear with pneumatic brake servo assistance, ventilated cross-drilled brake discs.
Four channel ABS 5 (The four channel ABS is set-up for the delivery specification Pirelli tyres. If tyres of another size are used please contact Porsche Motorsport).
ABS impulse disc, front axle 48 teeth
ABS impulse disc, rear axle 48 teeth
Front brake disc One piece steel – Diameter = 350 mm, Brake disc thickness 34 mm, 6 piston – aluminum brake caliper.
Rear brake disc One piece steel – Diameter = 330 mm, Brake disc thickness 28 mm, 4 piston – aluminum brake caliper.
Brake pad thickness Front / rear 18 / 18 mm
Brake pad Front axle Pagid P50, rear axle RS14 green (delivery specification)
Chassis
Basis 911 GT3 with weight optimised shell
Adjustable synthetic plastic rear wing with raised wing profile
Carbon fibre doors
Special GT3 Cup nose section with upper cooling air exit
‘Makralon’ door windows and rear screen.
Interior
Trim without noise insulation, integral roll cage
Production car fuel cell 64 litres.
Recaro Racing bucket seat (drivers side only)
Six point safety harness. Detachable Momo steering wheel.
Fire extinguisher system, compliant with FIA standard (AFFF, capacity 4 L).
Identical to 911 GT3 RS
Panel quick release fittings.
Interior colour to match exterior car colour.
Dimensions & Weight
Length 4430 mm
Width 1765 mm over rear axle – 1731 mm over front axle
Wheelbase 2350 mm
Front track width 1515 mm
Rear track width 1578 mm
Dry Weight ca. 1170 kg
Fluid Capacities
Fuel system: 64 L.
To be able to compete in International events the tank must be changed dependent on the local regulations, e.g. for a 100ltr FT3 tank from the GT3 RS.
Gearbox: 3.8 L.
Engine: ca.10 L.
(The Oil level check should be carried out with the dipstick,through the filler neck with the engine at operating temperatureand running at idle speed).
Lubricants & Fuel
Engine oil: Mobil 1 (0W – 40) or Mobil 1 (5W – 40)
